Australian Media Center Community: [SOLVED] Fix For Changing Tuner Sources - Australian Media Center Community

Jump to content


Welcome to the Australian Media Center Community

You are currently viewing our support forum as a guest - you'll need to register in order to participate in our community and make this annoying message disappear!

Registration is fast, simple and absolutely free - so why not join our community today and register now. If you experience any problems with the registration process, please send a message to Mike

Page 1 of 1
  • You cannot start a new topic
  • This topic is locked

[SOLVED] Fix For Changing Tuner Sources Rate Topic: -----

#2 User is online   logifuse 

  • Grand Poobah
  • Group: Global Moderators
  • Posts: 10064
  • Joined: 08-March 06

Posted 10 June 2010 - 09:12 PM

Follow these steps exactly:

1. Go to Tasks>Settings>TV>Guide>Edit Channels & click on Clear All & Save.
2. Click on Edit Channels & then select (tick) all the channels you wish to have. DO NOT GO IN TO THE SETTINGS FOR ANY CHANNEL AT THIS STAGE. Click Save.
3. Click on Edit Channels & then click on your first selected (ticked) channel. Click on Edit Sources & deselect (un-tick) the unwanted sources, leaving the correct sources as the only ones selected (ticked). Click Save & then Save again, & repeat for each of your selected channels.
4. Once you have deselected the unwanted sources for all of your selected channels, at the Edit Channels screen, click Save & then exit from the Settings area all together.

This should flag the sources overrides in the database correctly & stop them being changed when a less than optimal signal is detected. Since doing the above, I have seen the situation where the correct sources have dropped to 1%, but the sources did not change to the offsets as they previously had.

Any discussion can be continued in this thread: http://www.xpmediace...-gathering.html

Justin

This post has been edited by logifuse: 01 September 2010 - 05:00 PM

2

Share this topic:


Page 1 of 1
  • You cannot start a new topic
  • This topic is locked

-->