Sign In »
Register Now!
Help
Okay so Channel TEN HD likes to freeze on me when I flick through.
If it's the last channel I leave it on upon closing MCE; it's the channel that appears when I open it - this doesn't seem to be a problem as it plays fine then.
The problem, however, occurs when I flick through channels - say back to Nine, then to Ten again... The image on Nine (or the previous channel) will freeze and I will not get any sound. I am able to change back to the previous channel without a problem but Ten HD will not work unless it's the initial channel on opening.
It is the same for every Ten channel in my listings.
Anyone know what could be the problem?
Thanks!
Australian Media Center Community: Channel Ten's PMS - Australian Media Center Community
Welcome to the Australian Media Center Community
 |
You are currently viewing our support forum as a guest - you'll need to register in order to participate in our community and make this annoying message disappear! Registration is fast, simple and absolutely free - so why not join our community today and register now. If you experience any problems with the registration process, please send a message to Mike |
Page 1 of 1
Channel Ten's PMS
Rate Topic:
#2
ExtremePC 
- Grand Poobah
-
- Group: Members
- Posts: 5336
- Joined: 21-December 04
Posted 18 September 2008 - 02:14 AM
Jacko304 said:
Okay so Channel TEN HD likes to freeze on me when I flick through.
If it's the last channel I leave it on upon closing MCE; it's the channel that appears when I open it - this doesn't seem to be a problem as it plays fine then.
The problem, however, occurs when I flick through channels - say back to Nine, then to Ten again... The image on Nine (or the previous channel) will freeze and I will not get any sound. I am able to change back to the previous channel without a problem but Ten HD will not work unless it's the initial channel on opening.
It is the same for every Ten channel in my listings.
Anyone know what could be the problem?
Thanks!
If it's the last channel I leave it on upon closing MCE; it's the channel that appears when I open it - this doesn't seem to be a problem as it plays fine then.
The problem, however, occurs when I flick through channels - say back to Nine, then to Ten again... The image on Nine (or the previous channel) will freeze and I will not get any sound. I am able to change back to the previous channel without a problem but Ten HD will not work unless it's the initial channel on opening.
It is the same for every Ten channel in my listings.
Anyone know what could be the problem?
Thanks!
Delete everything and rescan the lot.
#3
skypilot
- MC Mentor
-
- Group: Members
- Posts: 1208
- Joined: 28-November 07
Posted 18 September 2008 - 04:19 PM
I had 10 standard & HD (Channel 5 & 50 in guide set-up) with no signal the other day so I went to different frequencies (Channel 24 and some other) and was fine - I then went back to 5 & 10 a day or so later - so beats me.
#6
bill24
- MC Mentor
-
- Group: Members
- Posts: 705
- Joined: 04-January 08
Posted 23 January 2012 - 03:22 PM
do not click link may be a virus or a hijack
Quote
Attention! Your browser is out of date. We recommend to update it. The new browser version will protect your computer from different internet-dangers and make ...
Share this topic:
Page 1 of 1
Post Sponsors